Power Plant Technology / Chemical Industry
Redesign modules are available, which can be applied instead of unavailable original equipment. These modules are fully compatible regarding pins and functionality.
You will find here just an excerpt from our delivery programme. Please ask for you concrete demands. Generally every unavailable module can be redesigned in the way that the original module can be replaced “plug and play” by the redesign.
Please send us your inquiry together with all information you have regarding the original part or send us an example of it. You will get our offer within three days and usually a redesign module within six weeks.
The original Siemens thyristor regulators with reversal contactor are no longer available. Regarding pin dimensions and functions, our newly developed and redesigned devices are fully compatible with the original, and can be installed/replaced “plug-and-play”in the existing…
The original Siemens thyristor regulators are no longer available. Regarding pin dimensions and functions, our newly developed and redesigned devices are fully compatible with the original, and can be installed/replaced “plug-and-play” in the existing location.
The modular…
The original Siemens thyristor regulators are no longer available. Regarding pin dimensions and functions, our newly developed and redesigned devices are fully compatible with the original, and can be installed/replaced “plug-and-play” in the existing location.
The modular units…
The original Siemens thyristor regulators are no longer available. Regarding pin dimensions and functions, our newly developed and redesigned devices are fully compatible with the original, and can be installed/replaced “plug-and-play” in the existing location.
The modular units…
The original Siemens thyristor regulators are no longer available. Regarding pin dimensions and functions, our newly developed and redesigned devices are fully compatible with the original, and can be installed/replaced “plug-and-play”in the existing location.
With an output…
The original Siemens thyristor regulators are no longer available. Regarding pin dimensions and functions, our newly developed and redesigned devices are fully compatible with the original, and can be installed/replaced “plug-and-play” in the existing location.
The modular units…
The original Siemens thyristor regulators are no longer available. Regarding pin dimensions and functions, our newly developed and redesigned devices are fully compatible with the original, and can be installed/replaced “plug-and-play” in the existing location.
The modular…
The original Siemens reversing contactor regulators are no longer available.
Regarding connection, dimensions and functions, our newly developed and redesigned devices are fully compatible with the original, and can be installed/placed “plug-and-play” in the existing location.
The…
The original Siemens reversing contactor regulators are no longer available.
Regarding connection, dimensions and functions, our newly developed and redesigned devices are fully compatible with the original, and can be installed/placed “plug-and-play” in the existing location.
The…
The original Siemens reversing contactor regulators are no longer available.
Regarding pin dimensions and functions, our newly developed and redesigned devices are fully compatible with the original, and can be installed/replaced “plug-and-play” in the existing location.
The…
The original Siemens reversing contactor regulators are no longer available.
Regarding pin dimensions and functions, our newly developed and redesigned devices are fully compatible with the original, and can be installed/replaced “plug-and-play” in the existing location.
The…
The original H&B AV07 module has a plug-and-play replacement in the VEW AV07 RED redesign.
The AV07 Contact Scan provides three UV1 to UV3 binary signals protecting by 0.1A fuses of Si1 to Si3 for a contact supply.
The +24V/-24V-DC-DC converter generates a stabilized 24V…
The redesign of the original AV97(H&B) module is used to secure the 24V supply voltage for 4 line measuring transducer and field devices as well as other signal conditioners with an output of 0…20mA.
The module provides the passive distribution of the 0…20MA analog signal for…
The redesign of AW02 module from H&B can use a plug-and-play solution instead of the original module.
The galvanic separation between the inlet-outlet and supply voltage is not provided using a modulator-transmitter and demodulator in the redesign, but using a modern, reliable…
The redesign of the HS01 module from the original equipment manufacturer H&B can be replaced ,, plug-and-play’’ with a compatible module thanks to the redesign of the HS01 RED.
The VEW HS01 RED contains three relays with two potential-free switch contacts (for 30V 1A or 60V…
The redesign of HV01 module from H&B can be used as a plug-and-play solution instead of the original module.
The module contains 6 short-circuit resistant, monitored and no-feedback amplifiers which act as the power supply for the console modules, each with an upstream OR…
The LL01 module from the original equipment manufacturer H&B can be replaced plug-and-play thanks to the redesign of the LL01 RED.
The VEW LL01 RED module contains 6 binary AND gates and 6 binary OR gates each with 2 to 4 inlets.
The module serves to connect the binary…
The LL02 module from the original equipment manufacturer H&B can be replaced plug-and-play thanks to the redesign of the LL02 RED.
The VEW LL02 RED module contains 12 AND gates each with 2 to 4 inlets.
5 AND gates each have a negated input.
The module acts as a user-modified…
The redesign of the VV01 module from the original equipment manufacturer H&B can be replaced with a plug-and-play module thanks to the redesign of the VV01 RED.
The VEW VV01 RED is used to secure the supply voltage from auxiliary circuits, which are not functionally part of…
The redesign of the XP01 module from the original equipment manufacturer H&B can be replaced with a plug-and-play module thanks to the redesign of the XP01 RED.
The XP01 RED module contains two differential amplifiers (V0, V1) each with four inverting and four non-inverting…
The module AS11 of the control system ISKAMATIK B can be replaced, pin and function compatible, by a redesign.
All special functions of the logic components S132, S133, S134, S135, and S137, which are not commercially available any more, have been implemented in a CPLD, so the…
The module AS12 of the control system ISKAMATIK B can be replaced, pin and function compatible, by a redesign.
All special functions of the logic components S132, S133, S134, S135, and S137, which are not commercially available any more, have been implemented in a CPLD, so the…
A plug-and-play redesign of the incremental decoder and signal evaluator is now available as a replacement for the original electronics in the H&B digital speedometer, which is also cross-compatible with original module.
I.e. the redesign can be used for the incremental decoder…
The redesign of the discontinued original E89100-B1649-L1 module is a completely pin compatible and function compatible replacement for the original.
The galvanic isolation between the input and output signals is provided for U1 to U6 via 6 optocouplers CNY65 (with VDE seal).
The…
The redesign of the EG2-M2 module (originally Pepperl + Fuchs) was developed to ensure the long-term operational life of existing plants if the original modules are no longer available from the manufacturer.
The redesigned modules are completely dimensionally, pin and…
The module FK11 of the control system ISKAMATIK B can be replaced, pin and function compatible, by a redesign.
All special functions of the logic components S132, S133, S134, S135, and S137, which are not commercially available any more, have been implemented in a CPLD, so the…
Die Original-Leistungselektronik KE3 des Herstellers Hartmann&Braun kann durch ein vollständig maß,-funktions- und klemmenkompatibles Redesign ,,plug and play’’ ersetzt werden.
Die VEW KE3 RED im Schalttafel-Aufbaugehäuse für Schienenmontage wirkt als Stellungsregler mit…
The original three-point power electronics SE1 from the manufacturer H&B or S&F can be replaced by a completely dimension-, function- and terminal-compatible redesign, plug-and-play.
The VEW SE1 RED in the switch panel housing for mounting rail mounting acts as a switching…
The LU370 power controller in the DECONTROL K control system has been discontinued.
To maintain the operation of the extremely reliable, robust and easily serviced device insert, replacement modules are often no longer available from the original equipment manufacturer…
The use of LUVO sensors require a precise determination of the installation depth of the probe pipe to the LUVO radial seal.
Imprecision in the measurement of the installation depth generates imprecise measurements of the gap between the radial seal and rotor and may lead to the…
The LUVO scopes are used in the air pre-heaters for power plants, have eddy current sensors to keep the gap between lamellar seal on the air preheater as narrow as possible.
To do so, the eddy-current sensor, which is an air coil embedded in a high-temperature resistant …
The VEW NG 89 03 RED generates two stabilized DC voltages, +5V (UD) and +24V (UB), while also providing the through connection for two voltages, +24V (US) und -24V (UV).
The redesign is a fully plug-and-play compatible device to replace the 89 NG 03 devices from ABB.
The VEW NG…
The redesign of the PE01 module takes the form of a 3HE 28TE 19” insert which is fully dimensionally compatible and functionally compatible with the original module from the manufacturer H&B.
The original module thus has a "plug-and-play” replacement in the redesign, with no…
The redesign of the bulk memory - coupler module PMK01 is used to couple the mass memory stations with PMM30 to the central stations of the process control system Contronic E.
The coupling uses a 25 pole and 50 pole shielded flat cable between two coupling modules, with one
set in…
The PMM30 hard-disk storage contains the Quantum Prodrive 80S as well as an integrated SCSI controller. The information exchange between the controller and the relevant station is controlled by the PCP 06 processor in the bulk memory via a SCSI interface.
When operating in the…
The redesign of the electronic position transmitter RWG 1001 of the original manufacturer AUMA Riester can be used plug and play instead of the original device in the given application.
The device converts the resistance value of a transmitter potentiometer into a proportional…
The redesign of the position sensor S2 is completely dimension compatible and function compatible with the original module from the manufacturer Schoppe & Faeser.
The original module thus has a "plug-and-play” replacement in the redesign, with no changes required to the system.
T…
The redesign of the position sensor S4 is completely dimension and function compatible with the original module from Schoppe & Faeser.
The original module thus has a "plug-and-play” replacement in the redesign, with no changes required to the system.
The position sensor works…
The isolation amplifier VEW 7407 RED is a fully function terminal- and installation-compatible redesign of the original amplifier by the manufacturer Knick.
The circuit technique complies with the most modern standards with wide range DC-DC-converters for auxiliary power, so…
The Redesign of the analog position indicator can be used on the actuating drive alternatively instead of the original Sipos-actuator technology.
It's plug-and-play compatible.
The device converts a rotary motion to a load-independent direct current, proportional to the rotation…